Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Everett Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair in Everett, WA, with same-day service on most failures and a free written estimate before any work begins. What makes our Ghost Controls work different is pattern recognition: our technicians have up to experience, they see these operators often, and they know how a solar-capable opener behaves through a Puget Sound winter. We are not affiliated with, authorized by or endorsed by Ghost Controls. We’re an independent gate service, and that independence is exactly why we can tell you honestly whether your operator needs a battery, a board, or nothing at all.

Call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Gate Repair Everett for Your Ghost Controls Gate Repair?
Ghost Controls equipment rewards a technician who understands its logic. The controller is doing real computation – tracking battery voltage under load, watching limit positions, listening to the obstruction sensor – and it will throw a symptom that looks like a board failure when the actual problem is a sagging battery or a bracket that moved two degrees. We diagnose that chain rather than guessing at the loudest part.
We repair and service Ghost Controls operators with quality parts that fit the equipment. Where a unit is still supported by its maker, we use the manufacturer’s board, arm and battery components; where it isn’t, we source aftermarket hardware that performs to spec for non-critical accessories rather than leaving a gate down. Nothing we do requires drilling a new hole in a casting or bypassing a safety input, so the work stays within the design of the unit.
Warranty-safe practice matters here. We don’t jumper out limit switches, we don’t disable obstruction sensing to make a gate “just close already,” and we don’t install a battery with the wrong chemistry or rating. Any of those shortcuts can void coverage on a unit that’s still under it. If your operator is inside its warranty period, tell us when you call and we’ll work with that – not around it. Electric gate acting up? That’s a diagnostic conversation, and it starts with the phone.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Everett
These operators fail in predictable ways. The list below is what we actually find on Ghost Controls systems around Everett, and why each one happens.
- Battery and solar-charge faults. The controller reports low battery or no charge after Everett’s short winter days, and the gate slows or stalls mid-travel when voltage sags under load. Roughly 160 rainy days a year means the panel spends months collecting diffuse light instead of direct sun, so the battery never fully recovers between cycles. A battery can test fine on a bench and still fail under the amp draw of a moving gate.
- Limit and obstruction-sensor drift. Swing arms loosen at the post bracket over time, so the opener “learns” a new limit position and the gate either stops short of the catch or reverses on the close cycle. Homeowners usually blame the board. Most of the time it’s mechanical – a bracket that walked, a hinge that sagged, or a post that shifted after a wet season.
- Control-board and receiver failures after power surges. Storm-season surges take out receivers and boards, and the tell is usually paired: remotes stop pairing and keypad codes drop at the same time, with no fault code shown. A board that’s lost its receiver section often looks completely healthy on the display.
- Corroded terminal blocks and harness connectors. Persistent damp attacks the operator housing, and corrosion at the terminations causes intermittent arm actuation and phantom safety reverses. The gate runs fine on a dry afternoon and misbehaves after three days of rain. That’s a moisture pattern, not a mystery.
- Water intrusion at the arm housing. A failed gasket or a housing that’s been sitting in splash from a downspout lets water into the arm, and the result is a motor that groans, binds or fails outright. This is the one failure mode where replacement sometimes beats repair – once corrosion reaches the windings, there’s nothing left to save.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Parts selection on a Ghost Controls unit isn’t complicated, but it isn’t careless either. On a supported unit, we use the manufacturer’s board, arm and battery where those components are the right fit. For non-critical accessories – solar regulation, mounting hardware, connectors – quality aftermarket parts are acceptable, and they’re often the difference between a gate that’s down for two weeks and a gate that’s running this afternoon. We don’t claim to stock Ghost Controls parts, and we’re not a dealer. We source what fits and we tell you what you’re getting.
Repair or replace – we’ll tell you which one actually makes sense. On a Ghost Controls operator under roughly a decade old with intact castings, repair is usually the right call. The arm housing and control board are the deciding factors: if either has been water-intruded past salvage, a replacement is the honest answer, and we’ll say so plainly rather than selling you a board that fails again in six months. Call (844) 834-1197 for a free estimate and a straight recommendation.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We start at the symptom you described and work backward: battery load test, solar output check, limit position review, then board and receiver diagnostics. On Ghost Controls units we’re looking for the interaction between charge state and limit learning, because one masks the other.
- 2
Repair or installation. Once we know what failed, we quote the job in writing and get your agreement before any work starts. The written estimate is the price. Repair work typically happens on the first visit; a new installation gets measured and scheduled.
- 3
Testing. We re-teach the limits, cycle the gate through full open and close, verify obstruction sensing and safety edges, and confirm every remote and keypad pairs and holds. Testing happens with the gate under real load, not on a bench.
- 4
Warranty and follow-up. We explain what we replaced and why, what to watch for as the seasons turn, and what coverage applies to the parts and labor we provided.
Here’s how a typical Ghost Controls call usually goes: a dual swing gate opens fine on a full-sun day but stalls halfway through on an overcast morning, and the homeowner mentions the keypad or remote working intermittently. The usual cause is a tired battery plus a solar panel that no longer keeps up, sometimes compounded by a loosened limit bracket that told the controller the gate had already hit its stop. A qualified technician load-tests the battery, checks solar output and wiring terminations, re-teaches the limits, and replaces the failing component rather than the whole operator.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Everett
We work on the Ghost Controls equipment you already own, and we install new systems when a property needs one. Our swing gate work covers the Heavy-Duty Dual Swing (TDS series) and the Solar-Compatible Single Swing (TS series), the Architectural Series swing openers, and the tube-gate and slide-rack operators. Battery backup is a core part of this – solar-capable systems live or die on their charge architecture, and we treat the panel, regulator and battery as one system rather than three separate parts. Motor repair on these units is routine work for us, not an upsell. Everett properties with a gate on a slope or a post set in settling ground get the ground checked before we touch the hinge, because a misaligned post will defeat a perfectly good operator every time.
We Also Service These Brands
We’re a gate specialist, not a single-brand shop. Alongside Ghost Controls, we service LiftMaster, Mighty Mule and DoorKing equipment, and our brand fluency runs from residential swing operators to commercial access-control hardware. That range matters when a property changes hands or a gate gets upgraded – you don’t need to hunt for a different company as your needs shift.

FAQs – Ghost Controls Gate Repair Service in Everett
No. We are an independent Ghost Controls service provider with no affiliation, authorization or endorsement from Ghost Controls. What we offer instead is familiarity: our technicians have diagnosed these operators often enough to recognize their failure patterns quickly, and that’s a practical advantage, not a badge.
Yes. On supported units we use the manufacturer’s board, arm and battery components, and quality aftermarket parts for non-critical accessories where the original part is unavailable. We’re not a Ghost Controls dealer and we don’t claim to stock their parts, but we will tell you exactly what we’re installing and why it fits.
Most repairs are finished in a single visit, typically a couple of hours depending on what failed and whether we need to re-teach limits across a dual gate. Battery and solar diagnostics add time because we load-test rather than eyeball. If a part has to be sourced, we’ll give you a realistic timeline when we quote the job, and installations are measured and scheduled rather than same-day.
We cover the swing operators – single and dual, including solar-compatible and Architectural Series units – plus tube-gate and slide-rack operators. That includes battery backup work, motor repair, control-board and receiver diagnostics, and new installation. If you’re unsure which system you have, read us the label when you call and we’ll sort it out.
Proper service shouldn’t, and we work to keep it that way. We use correctly rated components, we don’t bypass safety inputs or jumper limits, and we don’t disable obstruction sensing to force a gate to close. Those shortcuts are what void coverage. Tell us at the start if your unit is still under warranty and we’ll account for it.
Most Ghost Controls repairs fall in the range of a battery and solar-charge service up to a board or arm replacement, and the written estimate sets the final price. The estimate itself is free, and we quote and get your agreement before any work starts, so there’s no gap between the number you approved and the number you’re invoiced. Call (844) 834-1197 for an exact quote – estimates are free.
Because a new battery that isn’t being adequately recharged behaves like an old one. Everett’s short winter days mean the solar panel produces far less than it does in summer, and the controller cuts power to protect the battery when voltage sags under the load of a moving gate. The fix is usually a combination of a battery load test, a solar output check and a look at the terminations – not a new operator.
Not necessarily, but simultaneous failure across every input points at something shared: the receiver section of the board, or a power event that took out the low-voltage supply. A surge during a storm season is the usual suspect, and a board with a dead receiver often shows no fault code at all. That’s a diagnostic we run on site.
Sometimes. If corrosion is limited to the housing, gaskets and connectors, it’s repairable. Once water has reached the motor windings, replacement is the honest recommendation, and we’ll show you why rather than just asserting it.
These operators are built to integrate with accessories, and adding an intercom or card reader to an existing gate is a common request. What we check first is whether the current board and power supply can carry the addition, because an accessory added to a marginal battery system just moves the failure downstream. Call (844) 834-1197 and we’ll talk through your setup.
Age and condition of the arm housing and control board decide it. Under roughly a decade old with intact castings, repair almost always wins. If either the housing or the board has been water-intruded past salvage, replacement makes more sense than paying twice. Call (844) 834-1197 for a free estimate – we’ll give you the straight answer.
Book Your Ghost Controls Service in Everett, WA
One call gets your Ghost Controls gate diagnosed, quoted and – in most cases – fixed the same day. We’re an independent gate specialist working on the Everett hillsides where posts shift and batteries struggle through the wet months. Call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and the written price you approve is the price you pay.
Written by the team at Gate Repair Everett.