Gate Repair Cost in Everett - Honest Price Ranges, Free Written Quote

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 834-1197

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Repair Cost in Everett?

Gate repair in Everett typically costs $185 to $520, with most single-issue fixes landing between $250 and $400. Motor and operator problems sit at the top of that range, while hinge, roller and alignment repairs sit near the bottom. Electrical and control-board faults are quoted per job once we’ve traced the fault, and every price is confirmed in a free written estimate before any work starts.

We work on the brand you already own, whether that’s a Mighty Mule unit on a residential driveway or a FAAC or BFT operator controlling a commercial entrance. That brand fluency matters for pricing: a technician who recognizes model-level failure patterns stops guessing and gets to the actual fault faster, which keeps labor hours down. Electric gate acting up? Call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Typical repair range in Everett: $185 to $520, with the written estimate setting the final price.
  • Operator and motor faults cost more than mechanical fixes like hinges and alignment.
  • Diagnosis is the variable that moves price most; brand-specific familiarity shortens it.
  • Repair is often the right call over replacement, and we’ll tell you which one actually makes sense.
  • Estimates are free, and technicians have up to experience across nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.

Gate Repair Cost Breakdown (2026)

These ranges reflect what gate work typically runs in the Everett market in 2026. They’re estimates, not quotes. A written estimate after an on-site look is what actually sets your price.

Repair Type Typical Cost Range What It Covers
Hinge, roller and track repair $185 – $340 Worn or bent hardware, track realignment, swing sag
Gate alignment and leveling $200 – $380 Hinge resets, post adjustment, slide gate tracking
Manual gate latch and hardware fix $185 – $300 Latches, catches, stops, basic mechanical repair
Electric gate operator repair $280 – $520 Motor, actuator, gear and drive-train faults
Circuit board and control board replacement $300 – $520 Board-level diagnostics and swap on supported operators
Sensor and safety device repair $220 – $400 Photo eyes, loop sensors, safety edge, obstruction sensing
Access control and keypad diagnostics $250 – $450 Entry keypads, remotes, receiver and wiring faults
Battery backup and power fault repair $240 – $420 Battery systems, low-voltage wiring, power supply faults
New gate installation Quoted per project Full installation, residential or light commercial
Maintenance visit (one-time) $185 – $350 Lubrication, adjustment, hardware check, operator inspection

What drives a repair up or down is fairly predictable. Motor and operator repairs cost more than mechanical hardware fixes because diagnosis takes longer and parts cost more. Board and control work sits high because the technician has to isolate whether the fault is the board, the wiring, the sensor, or the power supply before replacing anything. Mechanical repairs on swing gates usually land low because the parts are simple and the labor is short. The single biggest swing factor is whether the problem is diagnosed on the first visit or takes two. That’s where brand familiarity pays off: a technician who knows the failure patterns of a specific LiftMaster or Linear model goes to the right component instead of working through the whole system.

What Affects Gate Repair Pricing in Everett

  • Gate type and weight. A light residential swing gate costs less to repair than a heavy commercial slide gate. Heavier panels take more labor to remove, adjust and re-hang, and they need sturdier hardware.
  • Operator brand and model. A budget Mighty Mule or Ghost Controls unit typically has simpler electronics than a commercial FAAC, BFT or DoorKing operator. Simpler systems are often faster to diagnose; commercial systems carry more sensors and access-control wiring, which means more to check.
  • Whether the fault is mechanical or electrical. Mechanical fixes like hinges, rollers and alignment run lower. Electrical problems – motor, board, sensor, access control – run higher because diagnosis is the bulk of the work.
  • Site access and vegetation. Gates set back from the drive, tangled in blackberry or overgrown hedge (common in Everett yards), or screened by fence take longer to reach and work around. Clearing access before we arrive shortens the visit.
  • Winter ground movement. Everett’s wet winters and freeze-thaw cycles around the Puget Sound lowlands shift posts and gates out of level. That’s a real driver of alignment and tracking calls here, and it’s often why a gate that worked all summer drags or sticks by February.
  • Parts availability. Common operator parts are quick to source. Less common boards or actuators may need to be ordered, which changes timing but not necessarily total cost.

How to Save on Gate Repair

There are a few things that consistently keep a repair on the lower end of the range. None of them require special tools or a technical background.

  • Call at the first symptom. A gate that’s dragging or sticking usually has a small fix behind it. Left alone, that same fault wears out the operator, and a $250 hardware repair becomes a $450 operator repair.
  • Clear the path before we arrive. Trim back vegetation, clear obstacles from the gate’s swing or slide path, and make sure the gate area is accessible. Less clearing time is less billed labor.
  • Write down the symptoms. Note when the gate fails, what it does, and any blinking lights or error codes on the control board. Precise symptoms speed up diagnosis and shorten the visit.
  • Get a free written estimate before authorizing work. We diagnose the fault and quote the repair in writing before touching anything. Call (844) 834-1197 to book a free estimate.
  • Ask about repair vs. replacement honestly. If a repair is the right call, we’ll say so. If replacement makes more sense for the age and condition of the system, we’ll tell you that too. You decide with the numbers in front of you.
  • Fix the sensor before the operator fails. Safety sensors and photo eyes are cheap compared to a motor that’s been forced to work around a blocked sensor. If your gate reverses or won’t close, get it looked at before the operator takes the strain.

What Does Electric Gate Repair Cost in Everett?

Electric gate repair in Everett typically runs $250 to $520, depending on whether the fault is the motor, the control board, a sensor, or the access-control wiring. Electrical fault diagnosis is the core of what we do, not an add-on. When an electric gate stops working, the goal is to find the actual failure point rather than recommend a full replacement and start fresh. An operator repair that fixes the real problem usually costs a fraction of a new system.

The most common electrical calls we take fall into a few patterns: the gate won’t open at all, it opens but won’t close, it reverses mid-cycle, it moves slowly or erratically, or the remote and keypad stop responding. Each points to a different part of the system. A technician with model-level familiarity with the operator on your gate can usually narrow that list quickly, which is the difference between a one-visit fix and a return visit.

For commercial property managers and HOA contacts, access-controlled entrances add a layer of complexity. Keypads, receivers, loop detectors and intercom wiring all need to be checked alongside the operator itself. We handle light-commercial swing, slide and barrier-arm systems under the same roof as residential work. If you manage an entrance and want a clear repair picture, call (844) 834-1197.

Is It Cheaper to Repair or Replace a Gate?

Repair is usually cheaper than replacement when the gate structure and operator are sound and the fault is isolated. A $350 operator repair on a working system almost always beats a replacement. Replacement makes more sense when the operator is beyond economic repair, the gate panel or frame is failing structurally, or repeated faults point to a system that’s near the end of its service life. We’ll tell you which one actually makes sense after we’ve diagnosed it, without steering you toward a replacement you don’t need.

Because we cover the full gate lifecycle – gate repair, electric repair and new installation – you don’t have to call a different company if repair turns out to be the wrong answer. If you’re weighing repair against replacement, call (844) 834-1197 and we’ll talk through the numbers with you.

Do You Offer Free Estimates on Gate Repair in Everett?

Yes. Estimates for gate repair in Everett are free. A technician comes out, diagnoses the fault, and gives you a written estimate before any repair work starts. The written estimate sets the final price, so there are no surprises when the work is done.

To book an estimate, call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often possible when you call early in the day.

Are Gate Repairs Covered by a Warranty?

Warranty terms on gate repairs depend on the specific repair and parts involved, and we confirm them in writing with your estimate. What we can tell you now: we stand behind our work and we’re straightforward about what’s covered before you sign off on any repair.

For questions about what a specific repair or installation includes, call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

FAQs – Gate Repair Cost

How much does gate repair cost in Everett?

Most gate repairs in Everett cost $185 to $520, depending on whether the fault is mechanical (hinges, rollers, alignment) or electrical (motor, control board, sensor, access control). A written estimate after an on-site diagnosis sets the final price. Call (844) 834-1197 for a free estimate – estimates are free.

How much does electric gate repair cost?

Electric gate repair in Everett typically runs $250 to $520. Motor and operator repairs, control-board replacement and access-control diagnostics sit in that range. The variation comes down to which component has failed and how quickly it can be isolated. Call (844) 834-1197 for an exact quote on your system.

Can you come today for a gate repair?

Same-day gate repair is often possible when you call early. We answer 24/7 and dispatch technicians, so the sooner you call, the better the chance of getting out today. Call (844) 834-1197 to check availability and book a free estimate.

Is it cheaper to repair a gate or replace it?

Repair is usually cheaper when the gate and operator are otherwise sound and the fault is isolated. A typical repair in the $185 to $520 range costs far less than a full replacement. Replacement only makes sense when the system is beyond economic repair or structurally failing. We’ll tell you which one actually makes sense and you can decide. Call (844) 834-1197.

Do you repair all gate brands?

We work across nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That covers most operators a homeowner or property manager is likely to have, from budget residential units to commercial-grade FAAC and BFT systems. Call (844) 834-1197 and tell us what’s on your gate.

Why does the same repair cost a different amount on different gates?

Because the parts and labor behind a repair differ by gate type, weight, operator brand and site access. A hinge replacement on a light residential swing gate takes less time than the same repair on a heavy commercial slide gate. Diagnosis time also varies by how complex the operator’s electronics are. For a number specific to your gate, call (844) 834-1197 for a free estimate.

Where to Start With Your Everett Gate Repair

If your gate is stuck open, reversing, dragging or refusing to respond, the priority is getting someone out to diagnose it before the fault spreads to the operator. We handle residential and light-commercial gates across Everett, work with the brand you already own, and give you a free written estimate before anything is touched. Whether it’s a Gate Repair Everett service call, an electric gate diagnosis, or a conversation about replacement, we’ll tell you what makes sense for your system.

Call (844) 834-1197 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Back to secure in one visit is the goal, and we’ll get you there as fast as the diagnosis allows.

Pricing reflects the Everett market as of 2026. Gate Repair Everett offers free estimates – call (844) 834-1197.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Whitney Sutton

"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."

- Luis Salazar

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Brooks
Need Gate Repair help in Everett? Licensed & insured · 1-hour response · free estimates
Call (844) 834-1197

Request a Free Estimate

Tell us what's going on in Everett. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7