Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Lynnwood, WA
Gate Installation in North Lynnwood, WA starts with the lot before it starts with the gate. Most of the homes here went up between the 1950s and 1970s, with carports, side yards and driveways set for a manual gate that the operator has to fit around, not the other way around. The long wet winters and the moss that comes with them mean every post, hinge and track has to be set up for water and green growth from day one. If your gate is already giving you trouble, call us at (844) 834-1197 and we’ll take a look.
Why North Lynnwood Homes Are Different
North Lynnwood’s older single-family tracts have something the newer subdivisions in Lynnwood proper don’t: gates that were installed decades ago and have been patched and re-hung ever since. That history changes the work. A gate that’s been on the same post through forty wet winters has usually been repaired two or three times, and the frame you’re working with has lost some of its square. When we measure for a new gate, we check hinge points and post footing before we quote a thing, because a gate that arrives to a soft footing will fail the same way the old one did.
The climate here drives most of it. The Pacific Northwest’s long wet winters and humid summers are hard on both metal and wood. Rust works its way through galvanized hinges, and wood posts rot from the ground line up. The nearby wetlands and tree canopy keep the air damp, and moss and algae grow on tracks, hinges and latch points through the warmer months. In the older subdivisions off 164th Street SW, the pattern is consistent enough that technicians here know to check the soil drainage under a post before replacing hardware. If the ground holds water, a new gate will fail within a season unless the footing situation is addressed.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main North Lynnwood Services
North Lynnwood homeowners call us about two things more than any other: a gate that’s stopped working, and the electrical or control side of an automatic gate. Both start with a diagnostic and a written price before any work begins.
Gate Repair in North Lynnwood
Most gate repair calls in North Lynnwood come down to hardware that’s been slowly losing ground to the region’s wet weather. Hinges seize with moss and grit, wood posts soften at the ground line, and latches stop lining up once a gate settles. We check the frame first, because a gate that’s sagging needs the hinge and post addressed before anything else. If the operator is fine and only the mechanical side has failed, we tell you that and skip the replacement talk. If you’re not sure whether the gate needs a repair or a full replacement, we look at it and give you a straight answer. You can read more about gate repair in North Lynnwood before you call.

Electric Gate Repair in North Lynnwood
An electric gate that won’t open, opens halfway and stops, or reverses on its own usually has a fault in one of three places: the operator motor, the control board, or the safety sensors. On an older North Lynnwood install, we also look at the wiring at the post, since damp soil and long wet seasons can work on outdoor connections over time. Bring us the brand and model if you know it. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, and knowing the model shortens the diagnosis. Details on electric gate repair in North Lynnwood are on that page.

Gate Installation in North Lynnwood
Gate Installation in North Lynnwood is usually about fitting a modern gate to a lot that was set up for a manual one. The 1950s to 1970s ranchers and split-levels here often have original swing gates or early automatic gates that need retrofit kits and hinge reinforcement before they’ll work reliably. The wet winters add one more requirement: posts and hardware have to be set for drainage and rust. That’s the difference between a gate that lasts and one that needs adjusting by the second wet season. When you’re ready to look at options, our Gate Installation page covers what we handle and how we approach a job, and we schedule an on-site measure and a written estimate before anything is ordered.
Automatic Gate Installation
Signs you need it
The gate is still manual but the driveway gets used daily, and someone in the household is tired of getting out to open and close it in the rain.
What it costs in North Lynnwood
Automatic gate installation typically runs $3,200 to $7,500 depending on the operator, the gate weight and how much wiring is needed, with commercial-grade access control on the higher end.
How we do it
We measure the opening and check the existing gate and posts, recommend an operator that fits the gate weight and use, then set the footing, mount the operator, run and connect the power and safety edges, and test the full cycle with you there.
Electric Gate Installation
Signs you need it
You want keypad, remote or intercom access and the current gate has no operator at all, or the old one has failed past the point of repair.
What it costs in North Lynnwood
Electric gate installation with a basic operator and keypad typically lands around $2,800 to $6,500, and a full commercial access-control setup with DoorKing or Linear hardware can run higher, quoted per site.
How we do it
We spec the operator and access control to the gate and the traffic it handles, confirm the power source with you, install the operator and controls, then set the limits, safety sensors and any entry devices before a final walkthrough.
What Gate Installation Costs in North Lynnwood
The figures below are typical ranges for the work, not a quote. The written estimate after the on-site measure sets the final price, and nothing is ordered until you approve it.
| Item | Typical range in North Lynnwood |
|---|---|
| Automatic gate installation (residential) | $3,200 – $7,500 |
| Electric gate installation with keypad access | $2,800 – $6,500 |
| Full commercial access control setup | Quoted per site |
Can you install a gate on an older North Lynnwood property with an original manual gate?
Yes. We measure the existing opening and check the posts and footings first, because older gates here often need hinge reinforcement or a new footing before an operator goes on. The estimate reflects what’s actually needed.
Do you handle the power run and the safety edges?
We handle the power run and safety edges as part of the install and test them with you before we leave. If the power source needs work beyond the gate circuit, we’ll flag it and let you decide how to proceed.
Brands We Service in North Lynnwood
We work on the brand you already own. That includes Linear and Viking for residential swing and slide gates, Ghost Controls for budget-friendly automatic openers, and DoorKing for commercial access control at a shared entrance. Brand fluency shortens diagnosis because we recognize model-level failure patterns instead of starting from scratch. See our brands for the full picture on what we service and how a visit usually goes.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Lynnwood, WA
Here are the typical ranges for the work we do in North Lynnwood. They’re estimates, and the written price after the on-site look sets the final number. You’ll know what you’re paying before any work starts.
| Service | Typical range in North Lynnwood |
|---|---|
| Automatic gate installation (residential) | $3,200 – $7,500 |
| Electric gate installation with keypad access | $2,800 – $6,500 |
| Full commercial access control setup | Quoted per site |
| Gate repair (hinge, latch, frame) | $180 – $650 |
| Electric gate repair (motor, control board, sensors) | $220 – $900 |
Price moves with the gate weight and width, how much rust or rot the posts have taken on, and whether the power source needs upgrading for a new operator. The wet winters and moss growth here mean we often find a footing that needs attention, and that’s reflected in the quote rather than added later. The written estimate is what you pay, and we confirm it with you before any work begins.
Neighborhoods We Serve in North Lynnwood
We cover the whole of North Lynnwood, from the older subdivisions off 164th Street SW to the streets closer to the Martha Lake and Mill Creek edges. The dense mid-century tracts are where most of our gate work happens, since the original gates and early automatics there are aging on the same timelines. Wherever you are in North Lynnwood, we set a scheduling window when we book you and confirm it the day before. Call (844) 834-1197 and we’ll fit you in.
- Subdivisions off 164th Street SW
- Ash Way corridor
- Streets bordering Martha Lake
- The Mill Creek edge
- Larch Way area
Service Area – Cities Near North Lynnwood
We also work in the towns around North Lynnwood, so if you’re on the edge of the city you don’t need to find a different company. The same wet-winter gate problems show up a few miles in any direction. If you’re nearby, call and we’ll tell you whether we cover your street. That includes Lake Stickney, WA, Martha Lake, WA, Mill Creek, WA and Silver Firs, WA, each handled the same way as North Lynnwood work, with an on-site measure and a written price before anything starts.
Serving North Lynnwood, WA – Our Local Coverage Area
We serve North Lynnwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Lynnwood
We schedule same-day visits where we can for repair work, and we set a window when we book you. Call (844) 834-1197 to check availability. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and closed Saturday.
That depends on your property and your HOA. Most cities require a permit for a new electric gate with a power run, and many HOAs here have rules on gate height and style. Ask your city’s building department and your HOA before we order anything. We can work with whatever they require.
Yes. We cover the whole of North Lynnwood, from the older tracts off 164th Street SW to the Martha Lake and Mill Creek edges. If you’re unsure whether your address falls inside our service area, call and we’ll tell you.
Whatever’s going on with your gate, a phone call gets it looked at. Call (844) 834-1197 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. The price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What North Lynnwood Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Whitney Sutton"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Luis Salazar"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Paige Brooks