Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Everett, WA
Gate installation in Everett is a different job than it is twenty miles south. The city’s hillside lots, wet winters and mix of century-old cottages and post-war ranches mean a gate has to be planned around slumping soil, constant moisture and hardware that may not match anything on a shelf. We’re a gate-focused team, not a general handyman who also hangs gates. We handle installation, repair and electric gate work across Everett, and our technicians have up to experience with the operators and hardware these properties actually use. Call (844) 834-1197 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Everett Homes Are Different
Everett sits on steep, glacially-carved hills, and that single fact shapes most of the gate work here. In neighborhoods like Bayside and Riverside, properties regularly deal with slumping soils and seasonal groundwater. When the ground under a gate post moves, the post goes with it, and suddenly a gate that latched cleanly in October drags, binds or misses the strike plate by an inch in March. Technicians here learn to check the ground before blaming the hinge.
Then there’s the housing stock. Everett mixes early-1900s craftsman and worker cottages, post-war ranches, and newer hillside developments, so a gate call can mean rewelding a rusted wrought-iron driveway gate one day and realigning a sagging wooden pedestrian gate on an older lot the next. The industrial properties along the waterfront often rely on original, corroded metal gates and openers that need custom retrofits rather than off-the-shelf parts.
The climate does its own damage. With roughly 160 rainy days a year and a wet, mild maritime climate, gates here see constant moisture: wood rot, rust and swollen hinges are routine. The occasional windstorm and winter freezes bend or jam gates that aren’t properly braced. When you call about a gate in Everett, the answer usually starts with the ground and the weather, not the motor.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Everett Services
Two jobs come up more than any other from Everett property owners: a gate that has stopped working and needs honest repair, and an automatic opener that has gone quiet or erratic.
Gate Repair in Everett
Most Everett repair calls start with a gate that drags, won’t latch, or has started to sag on one side. Given the wet climate and the number of older lots, we check the footing and the ground before we touch the hinge, because a shifting post on a hillside property will undo any hardware fix. Rusted wrought-iron driveway gates and swollen wooden pedestrian gates are both common here, and we repair rather than push a replacement when the frame is sound. For a focused diagnostic, see Gate Repair in Everett. Estimates are free, and the price is agreed before any work starts.

Electric Gate Repair in Everett
An electric gate that opens halfway, reverses for no reason or clicks without moving usually points to the control board, a limit switch, a sensor or the wiring rather than the motor itself. Moisture is the leading suspect on Everett properties, since damp cabinets and corroded connections cause intermittent faults that vanish on a dry day. We diagnose across the brands owners actually have, including Linear and DoorKing operators, and we tell you plainly whether a repair makes sense. Read more about Electric Gate Repair in Everett. Estimates are free, and nothing runs until you approve the written price.

Gate Installation in Everett
Gate installation in Everett means planning around the ground first and the gate second. With roughly 160 rainy days a year, a wet, mild maritime climate and hillside lots in Bayside and Riverside where soils slump and groundwater rises, a gate set on a shallow or badly drained footing will be out of alignment within a season. Add a housing stock that runs from early-1900s cottages to post-war ranches to newer hillside builds, and you get driveways where the grade, the drainage and the existing fence line all have to be measured before anything is ordered. That’s the work we do: a proper on-site measure, a written price, and an installation planned for the site instead of a catalog. You can read the full scope on our gate installation page, but the essentials are here.
Automatic Gate Installation
An automatic gate pairs a new or existing gate leaf with an operator, and in Everett the operator has to be matched to the grade and to how the driveway drains. On hillside properties the arm or actuator often sits right where runoff passes, so placement matters as much as the unit itself.
Signs you need it
You’re driving down to open a gate by hand every day, or an older opener has failed twice and the replacement parts no longer fit it.
What it costs in Everett
A full automatic gate installation typically runs $3,500 to $9,000 or more depending on gate size, operator and access control, with the written estimate setting the final price.
How we do it
We measure the opening and grade on site, check the footing and drainage, then set posts, hang the gate, mount and wire the operator, and test the safety edges and limits before we hand over the controls.
Driveway Gate Installation
Driveway gates are the most common request in Everett, and the properties vary enough that a standard kit rarely fits cleanly. Older lots often have an existing fence line that has settled, and newer hillside builds may have a grade change right at the entrance.
Signs you need it
The driveway is open to the street, the old gate is beyond repair, or you want a swing or slide gate that closes the entrance properly.
What it costs in Everett
Driveway gate installation typically runs $2,200 to $6,500 for a manual swing or slide gate, and $3,500 to $9,000 or more once an operator and access control are added.
How we do it
We confirm the swing or slide direction against the site, set the posts to proper footing depth with drainage in mind, hang and align the gate, then adjust the latch, stops and hinges for smooth travel.
What Gate Installation Costs in Everett
These are typical ranges for Everett work, not quotes. On-site grading, drainage corrections and the operator you choose are the biggest variables, and the written estimate you get on site sets the final number.
| Item | Typical range in Everett |
|---|---|
| Manual swing or slide driveway gate | $2,200 – $6,500 |
| Automatic gate installation with operator | $3,500 – $9,000+ |
| Operator and access control added to an existing gate | $1,800 – $4,500 |
Do I need a permit to install a gate in Everett?
Often yes, especially where the gate sits near a property line, a retaining wall or a slope. Check with the city’s building department before ordering, and we can walk you through what the site will need.
Can you install a gate on a sloped or hillside driveway in Everett?
Yes. Hillside lots in Bayside and Riverside are common here, and the fix is proper footing depth, drainage and an operator rated for the grade. We measure the slope on site before recommending anything.
Brands We Service in Everett
We work on the brand you already own. Our team is fluent across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, covering swings, slides and barrier arms. Brand familiarity speeds up diagnosis, since we recognize failure patterns at the model level. See our brands for the full list. Most repairs are handled in one visit once the right part is identified.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Everett, WA
Every number below is a typical estimate, not a quote. Hillside grading, drainage correction, footing replacement and the operator or access-control hardware you choose push costs up in Everett, and older properties with corroded or nonstandard hardware can add labor. The price is quoted and agreed before any work starts, so the written estimate is the number you pay.
| Service | Typical range in Everett |
|---|---|
| Manual swing or slide driveway gate | $2,200 – $6,500 |
| Automatic gate installation with operator | $3,500 – $9,000+ |
| Operator and access control added to an existing gate | $1,800 – $4,500 |
| Gate repair (hinges, latches, alignment) | $180 – $650 |
| Electric gate repair (board, sensor, motor) | $250 – $900 |
| Gate post or footing reset | $400 – $1,500 |
| Gate operator replacement | $900 – $3,200 |
| Access control or keypad installation | $350 – $1,400 |
| Safety edge or sensor replacement | $200 – $600 |
Neighborhoods We Serve in Everett
We take gate calls across Everett, and the terrain changes the work from one part of the city to another. In Bayside and Riverside, hillside lots mean we spend time on footings and drainage before anything else. In the older core, craftsman and worker cottages often have wooden gates that have absorbed decades of rain. Out toward the newer hillside developments, the gates are heavier and the operators more complex. Some of the industrial properties along the waterfront need custom retrofits for original metal gates. Wherever you are in Everett, we aim to get you back to secure in one visit, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
- Bayside
- Riverside
- North Everett
- Silver Lake
- Port Gardner
Service Area – Cities Near Everett
Everett is our home base for this page, and we also take gate work in the communities around it. If you’re just outside the city line, we likely cover you. We handle installation, repair and electric gate work in Eastmont, WA, Mukilteo, WA, Mill Creek, WA and Silver Firs, WA, with the same on-site measure and written estimate. Call (844) 834-1197 to confirm your address and get a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Everett, WA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Everett
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Same-day repair is often possible for gates that are stuck open or won’t latch. A call outside dispatch hours is booked into the next opening. Installation work is measured and scheduled after the free estimate.
It depends on where the gate sits and what your HOA requires. Gates near a property line, a retaining wall or a slope often need a city permit, so ask Everett’s building department before ordering. If you’re in an HOA, check the rules on height, style and setback first.
Yes. We serve the whole city, from Bayside and Riverside to North Everett, Silver Lake and Port Gardner, plus nearby communities like Mukilteo and Mill Creek. Hillside lots get the same footing and drainage check as any other property before we quote.
If you’ve got a gate that won’t close, an operator that’s acting up, or a driveway that needs a proper gate, call (844) 834-1197 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll tell you honestly whether a repair or a replacement makes more sense, and the price is agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Everett Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Whitney Sutton"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Luis Salazar"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Paige Brooks