Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Eastmont, WA
Gate installation in Eastmont usually means one of two things: replacing a worn-out side-yard or driveway gate on an older lot, or putting in an automatic system where there wasn’t one before. Eastmont’s mix of 1950s-1970s ranch homes and newer townhome clusters shapes every job we quote here, because the fences, posts and property lines are rarely standard. We focus only on gate systems – swing, slide and barrier arm – and we work on the brand you already own. Call (844) 834-1197 to set up a free estimate.
Why Eastmont Homes Are Different
Eastmont is an unincorporated, densely built slice of south Everett in ZIP 98208, and density is the first thing that changes the work. Mid-century and 1960s-70s single-family lots sit shoulder-to-shoulder with 1990s-2000s townhome developments, so a gate on one property often shares a fence line, a driveway apron or a trash enclosure with a neighbor. On the older lots, that means narrow side yards where a gate has to be measured to the inch, and fences built directly on grade, so the bottom rail sits in the wet and takes the rot first.
The climate does the rest. Eastmont sits in the Puget Sound lowlands: wet, mild winters soak wood gates and rust chain-link and steel hardware for months, then the dry summer shrinks the wood and loosens the hardware. A gate that swelled and stuck in February can rattle and drop by August. Out on the older side streets off 132nd and 128th, we routinely find posts rotted out at the soil line under blackberry and ivy growth – a failure that’s invisible from the street and often gets misdiagnosed as a hinge problem.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Eastmont Services
Most Eastmont calls we get fall into two groups: repairing the gate that’s already there, and diagnosing the electric operator that stopped working.
Gate Repair in Eastmont
The repair work in Eastmont leans heavily toward old, sagging, non-standard gates: homeowner-installed wood and chain-link driveway and side-yard gates that have been patched several times, plus HOA-maintained townhome common gates where one failing hinge affects shared access. Because so many of these gates were never built to a standard size, we measure the actual opening before we quote – the fix is often a post and hinge correction rather than a whole new gate. Learn more about Gate Repair in Eastmont.

Electric Gate Repair in Eastmont
Electric gate acting up? In Eastmont the operators we see most are builder-grade units on townhome entrances and older residential actuators on driveway gates, and the failure is usually a control board, a sensor that’s drifted out of alignment, or a motor that’s been fighting a gate that no longer swings freely. We diagnose electrical, mechanical and control-board faults instead of recommending a full replacement by default. See our Electric Gate Repair in Eastmont page for what that visit involves.

Gate Installation in Eastmont
Gate installation in Eastmont starts with the lot, not the catalog. On the older 1950s-1970s streets in this part of south Everett, property lines sit close to the house, side yards are narrow, and decades of blackberry and ivy have hidden where the original posts actually land – so a new gate here is a measuring and fitting job before it’s anything else. Our technicians have up to experience, and if you want the full picture of what we install, start with our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re hauling a gate open and closed by hand every day, or the gate you have was never built to carry an operator and the hardware is already straining.
What it costs in Eastmont
A typical automatic gate installation in Eastmont runs about $3,500 to $12,000 depending on the gate size, whether the access is swing or slide, and the operator you choose – the written estimate sets the final price.
How we do it
We measure the opening and check the posts, confirm the gate is sound enough to automate, then mount and align the operator, set the limits, and test the safety edges and access control before we hand it over.
Sliding Gate Installation
Signs you need it
A sloping driveway or a short side yard where a swing gate would foul the fence or the house is the usual sign that a slide is the better fit.
What it costs in Eastmont
Sliding gate installation in Eastmont typically lands between about $1,800 and $8,000, depending on the width of the opening and whether the track and operator are included.
How we do it
We set the track or cantilever footing to proper depth, hang and level the gate so it tracks cleanly, then wire and program the operator and confirm the safety edges stop the gate on contact.
What Gate Installation Costs in Eastmont
| Item | Typical range in Eastmont |
|---|---|
| Automatic gate installation | $3,500 – $12,000 |
| Sliding gate installation | $1,800 – $8,000 |
| Driveway gate installation | $2,000 – $9,000 |
Do you handle the power run and the safety edges for a new gate in Eastmont?
Yes. We handle the operator wiring and the safety edges as part of the install, and we test that the gate reverses on contact before we finish. The price is quoted and agreed before any work starts.
Will an automated gate work on an older Eastmont lot with a narrow side yard?
Often, yes, but the swing arc has to be measured first. On narrow Eastmont side yards a slide gate or a lighter actuator may be the only layout that clears the fence, so we measure on site rather than quote blind.
Brands We Service in Eastmont
We work on the brand you already own, across the systems common on Eastmont residential and light-commercial gates – Linear and Ghost Controls on residential operators, Viking and DoorKing on heavier swing and slide and barrier arm setups. We don’t claim stocked parts, but brand familiarity shortens diagnosis. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Eastmont, WA
| Service | Typical range in Eastmont |
|---|---|
| Automatic gate installation | $3,500 – $12,000 |
| Sliding gate installation | $1,800 – $8,000 |
| Driveway gate installation | $2,000 – $9,000 |
| Gate repair (hinge, latch, alignment) | $150 – $650 |
| Electric gate repair (control board, sensor) | $200 – $900 |
| Gate operator replacement | $800 – $3,500 |
| Post replacement and re-hang | $300 – $1,200 |
| Safety edge and sensor service | $150 – $500 |
In Eastmont, price climbs when the old posts have rotted at the soil line and have to be reset or replaced before anything can be hung, and when a non-standard opening means the gate has to be fitted rather than swapped. We quote and agree the price before any work starts, so the number on the estimate is the number you pay.
Neighborhoods We Serve in Eastmont
We cover Eastmont and the surrounding south Everett streets, including the older side streets off 132nd and 128th where most of the retrofit work is, plus the townhome clusters where HOA common gates are shared. Dispatch runs Sunday through Friday, 7am to 7pm – call (844) 834-1197 and we answer 24/7. A call outside dispatch hours is booked into the next opening.
- The side streets off 132nd
- The side streets off 128th
- Townhome and condo clusters in ZIP 98208
- Ranch and split-level blocks in south Everett
Service Area – Cities Near Eastmont
Eastmont sits close to several neighboring communities we also cover, and the same wet-winter climate and aging-gate problem shows up across them. If you’re just outside Eastmont, we can still take the call – our Mill Creek, WA, Silver Firs, WA, Everett, WA and Lake Stickney, WA pages show what we handle nearby.
Serving Eastmont, WA – Our Local Coverage Area
We serve Eastmont and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Eastmont
Often, yes. We dispatch Sunday through Friday, 7am to 7pm, and call (844) 834-1197 for the fastest booking. A call outside dispatch hours is booked into the next opening, and the estimate is free.
It depends on the gate and the property. Townhome common gates are HOA-maintained, so approval usually runs through the association, and for a new or widened driveway gate ask the city about permits before we order. We’ll tell you what we need from you.
Yes. We cover Eastmont and the nearby south Everett streets, including the older side streets off 132nd and 128th and the townhome clusters. If you’re just outside Eastmont, call and we’ll confirm coverage.
Call (844) 834-1197 for a free estimate on gate installation, electric gate repair or gate repair in Eastmont. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Eastmont Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Whitney Sutton"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Luis Salazar"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Paige Brooks