Gate Company in Everett - Same-Day Service, Priced Before We Start

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 834-1197

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Gate Company in Everett, WA | Gate Repair Everett
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Everett, WA

Gate installation in Everett is a different job than it is twenty miles south. The city’s hillside lots, wet winters and mix of century-old cottages and post-war ranches mean a gate has to be planned around slumping soil, constant moisture and hardware that may not match anything on a shelf. We’re a gate-focused team, not a general handyman who also hangs gates. We handle installation, repair and electric gate work across Everett, and our technicians have up to experience with the operators and hardware these properties actually use. Call (844) 834-1197 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 834-1197

Why Everett Homes Are Different

Everett sits on steep, glacially-carved hills, and that single fact shapes most of the gate work here. In neighborhoods like Bayside and Riverside, properties regularly deal with slumping soils and seasonal groundwater. When the ground under a gate post moves, the post goes with it, and suddenly a gate that latched cleanly in October drags, binds or misses the strike plate by an inch in March. Technicians here learn to check the ground before blaming the hinge.

Then there’s the housing stock. Everett mixes early-1900s craftsman and worker cottages, post-war ranches, and newer hillside developments, so a gate call can mean rewelding a rusted wrought-iron driveway gate one day and realigning a sagging wooden pedestrian gate on an older lot the next. The industrial properties along the waterfront often rely on original, corroded metal gates and openers that need custom retrofits rather than off-the-shelf parts.

The climate does its own damage. With roughly 160 rainy days a year and a wet, mild maritime climate, gates here see constant moisture: wood rot, rust and swollen hinges are routine. The occasional windstorm and winter freezes bend or jam gates that aren’t properly braced. When you call about a gate in Everett, the answer usually starts with the ground and the weather, not the motor.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Everett Services

Two jobs come up more than any other from Everett property owners: a gate that has stopped working and needs honest repair, and an automatic opener that has gone quiet or erratic.

Gate Repair in Everett

Most Everett repair calls start with a gate that drags, won’t latch, or has started to sag on one side. Given the wet climate and the number of older lots, we check the footing and the ground before we touch the hinge, because a shifting post on a hillside property will undo any hardware fix. Rusted wrought-iron driveway gates and swollen wooden pedestrian gates are both common here, and we repair rather than push a replacement when the frame is sound. For a focused diagnostic, see Gate Repair in Everett. Estimates are free, and the price is agreed before any work starts.

Gate Repair in Everett

Electric Gate Repair in Everett

An electric gate that opens halfway, reverses for no reason or clicks without moving usually points to the control board, a limit switch, a sensor or the wiring rather than the motor itself. Moisture is the leading suspect on Everett properties, since damp cabinets and corroded connections cause intermittent faults that vanish on a dry day. We diagnose across the brands owners actually have, including Linear and DoorKing operators, and we tell you plainly whether a repair makes sense. Read more about Electric Gate Repair in Everett. Estimates are free, and nothing runs until you approve the written price.

Electric Gate Repair in Everett
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 834-1197

Gate Installation in Everett

Gate installation in Everett means planning around the ground first and the gate second. With roughly 160 rainy days a year, a wet, mild maritime climate and hillside lots in Bayside and Riverside where soils slump and groundwater rises, a gate set on a shallow or badly drained footing will be out of alignment within a season. Add a housing stock that runs from early-1900s cottages to post-war ranches to newer hillside builds, and you get driveways where the grade, the drainage and the existing fence line all have to be measured before anything is ordered. That’s the work we do: a proper on-site measure, a written price, and an installation planned for the site instead of a catalog. You can read the full scope on our gate installation page, but the essentials are here.

Automatic Gate Installation

An automatic gate pairs a new or existing gate leaf with an operator, and in Everett the operator has to be matched to the grade and to how the driveway drains. On hillside properties the arm or actuator often sits right where runoff passes, so placement matters as much as the unit itself.

Signs you need it

You’re driving down to open a gate by hand every day, or an older opener has failed twice and the replacement parts no longer fit it.

What it costs in Everett

A full automatic gate installation typically runs $3,500 to $9,000 or more depending on gate size, operator and access control, with the written estimate setting the final price.

How we do it

We measure the opening and grade on site, check the footing and drainage, then set posts, hang the gate, mount and wire the operator, and test the safety edges and limits before we hand over the controls.

Driveway Gate Installation

Driveway gates are the most common request in Everett, and the properties vary enough that a standard kit rarely fits cleanly. Older lots often have an existing fence line that has settled, and newer hillside builds may have a grade change right at the entrance.

Signs you need it

The driveway is open to the street, the old gate is beyond repair, or you want a swing or slide gate that closes the entrance properly.

What it costs in Everett

Driveway gate installation typically runs $2,200 to $6,500 for a manual swing or slide gate, and $3,500 to $9,000 or more once an operator and access control are added.

How we do it

We confirm the swing or slide direction against the site, set the posts to proper footing depth with drainage in mind, hang and align the gate, then adjust the latch, stops and hinges for smooth travel.

What Gate Installation Costs in Everett

These are typical ranges for Everett work, not quotes. On-site grading, drainage corrections and the operator you choose are the biggest variables, and the written estimate you get on site sets the final number.

Item Typical range in Everett
Manual swing or slide driveway gate $2,200 – $6,500
Automatic gate installation with operator $3,500 – $9,000+
Operator and access control added to an existing gate $1,800 – $4,500

Do I need a permit to install a gate in Everett?

Often yes, especially where the gate sits near a property line, a retaining wall or a slope. Check with the city’s building department before ordering, and we can walk you through what the site will need.

Can you install a gate on a sloped or hillside driveway in Everett?

Yes. Hillside lots in Bayside and Riverside are common here, and the fix is proper footing depth, drainage and an operator rated for the grade. We measure the slope on site before recommending anything.

Brands We Service in Everett

We work on the brand you already own. Our team is fluent across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, covering swings, slides and barrier arms. Brand familiarity speeds up diagnosis, since we recognize failure patterns at the model level. See our brands for the full list. Most repairs are handled in one visit once the right part is identified.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Everett, WA

Every number below is a typical estimate, not a quote. Hillside grading, drainage correction, footing replacement and the operator or access-control hardware you choose push costs up in Everett, and older properties with corroded or nonstandard hardware can add labor. The price is quoted and agreed before any work starts, so the written estimate is the number you pay.

Service Typical range in Everett
Manual swing or slide driveway gate $2,200 – $6,500
Automatic gate installation with operator $3,500 – $9,000+
Operator and access control added to an existing gate $1,800 – $4,500
Gate repair (hinges, latches, alignment) $180 – $650
Electric gate repair (board, sensor, motor) $250 – $900
Gate post or footing reset $400 – $1,500
Gate operator replacement $900 – $3,200
Access control or keypad installation $350 – $1,400
Safety edge or sensor replacement $200 – $600

Neighborhoods We Serve in Everett

We take gate calls across Everett, and the terrain changes the work from one part of the city to another. In Bayside and Riverside, hillside lots mean we spend time on footings and drainage before anything else. In the older core, craftsman and worker cottages often have wooden gates that have absorbed decades of rain. Out toward the newer hillside developments, the gates are heavier and the operators more complex. Some of the industrial properties along the waterfront need custom retrofits for original metal gates. Wherever you are in Everett, we aim to get you back to secure in one visit, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

  • Bayside
  • Riverside
  • North Everett
  • Silver Lake
  • Port Gardner

Service Area – Cities Near Everett

Everett is our home base for this page, and we also take gate work in the communities around it. If you’re just outside the city line, we likely cover you. We handle installation, repair and electric gate work in Eastmont, WA, Mukilteo, WA, Mill Creek, WA and Silver Firs, WA, with the same on-site measure and written estimate. Call (844) 834-1197 to confirm your address and get a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Serving Everett, WA – Our Local Coverage Area

We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Everett

Ready to get started? Free estimates · 1-hour response in Everett
Call (844) 834-1197

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Everett Customers Say

★★★★★ 4.8 from 8+ reviews

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Whitney Sutton

"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."

- Luis Salazar

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Brooks

How It Works in Everett

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Everett - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Everett. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7