Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Silver Firs, WA
Gate Installation in Silver Firs means working with what this hillside actually is: a wooded, unincorporated Snohomish County community of planned subdivisions built mostly in the 1990s and 2000s, where tall Douglas fir and cedar canopy hangs over nearly every driveway and backyard. New gates here have to handle shade, needle debris, and wet glacial soil from the first day they’re set, not after a decade of settling. We install swing, slide, and barrier arm gates for homes and small commercial entrances, and we diagnose repair or replace honestly before anyone orders hardware. Call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Silver Firs Homes Are Different
Silver Firs sits off the Highway 9 and 132nd St SE corridor, and it isn’t inside Everett or Mill Creek city limits. That distinction matters the moment you price a gate: permits, setbacks, and inspection questions route through Snohomish County PDS, not a city building department. Homeowners who assume Mill Creek rules apply get surprised.
The housing stock shapes the work too. Most lots here are cul-de-sac parcels with privacy fencing and driveway gates on two-story tract and semi-custom homes from the late 1990s through the 2000s. Those builder-grade wood and basic metal gates are now 15 to 25 years old, which means hinges, latches, and posts are at the end of their first life while the automation is often a retrofit decision rather than an original one.
Then there’s the canopy. Long damp shoulder seasons under dense evergreen cover keep posts and wood gates saturated. Rot climbs at buried posts, rust sets in at hinges, moss and algae coat vertical surfaces. Fallen fir needles and moss pack gate tracks and swing zones, so binding shows up every autumn like a season, not a coincidence. Gates along tree-lined lots also sag because fence posts were set in heavy, wet glacial soils without proper drainage. Those jobs are usually about re-setting or sleeving the post in gravel and concrete, not just adjusting hardware.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Silver Firs Services
Two requests come in most from Silver Firs homeowners: a gate that has stopped working and needs a real diagnosis, and a gate that needs to be replaced or automated from scratch.
Gate Repair in Silver Firs
Most repair calls here start with a gate that drags, sticks, or won’t latch. In Silver Firs the culprit is often seasonal debris – fir needles and moss packed into a track or swing zone – or a post that has shifted in the wet glacial soil under the fence line. We check the hardware, the posts, and the geometry before assuming the operator is at fault, because replacing a motor on a sagging gate is money wasted. For gates along tree-lined lots, our gate repair in Silver Firs work usually begins with the post and drainage, then moves to hinges and latches, so the gate closes clean before anything electrical gets touched.

Electric Gate Repair in Silver Firs
An electric gate acting up usually means one of four things: the motor, the circuit board, a sensor, or the access control hardware feeding it. We diagnose all four rather than defaulting to a full replacement, which matters on a hillside where a gate may have been automated years after installation and the wiring was never set up generously. Shade and damp don’t help: moisture gets into control enclosures and safety edge connections over long wet seasons. Our electric gate repair in Silver Firs covers residential and light-commercial systems, from a Mighty Mule actuator to a DoorKing entry setup, with the goal of getting the gate secure again in one visit when parts allow.

Gate Installation in Silver Firs
Gate Installation in Silver Firs starts with the soil and the shade, not the gate catalog. Posts here go into heavy, wet glacial ground under a Douglas fir canopy that drops needles all fall, so a gate set without proper footing depth and drainage will sag within a few seasons no matter how good the hardware is. Most properties we see are late-1990s to 2000s homes where the original builder-grade gate has reached the end of its first life, and the homeowner is deciding between a fresh wood or ornamental iron gate and adding automation at the same time. That’s a design conversation as much as a construction one: swing clearance under low branches, track layout around moss-prone zones, and where power and controls will actually live. We handle Gate Installation as a measured, scheduled project rather than a same-day call, and the free on-site measure and written price come before anything is ordered. Our technicians have up to experience.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in the rain, or the gate is heavy enough that manual operation is becoming a daily chore.
What it costs in Silver Firs
Automation added to an existing gate typically runs $1,200 – $3,500, while a full automatic gate package including the gate itself typically runs $3,500 – $8,000.
How we do it
We measure the gate and swing or slide path, confirm power and control locations, set and sleeve the posts or track for proper footing in the local soil, hang or mount the gate, then install and tune the operator and safety edges before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your original builder-grade driveway gate is sagging, the wood is rotting at the post line, or you want a gate that matches a mature Silver Firs lot instead of the one the builder left behind.
What it costs in Silver Firs
A new driveway gate installation typically runs $2,500 – $6,500, and swing gates generally land lower in that range than slide gates of similar width.
How we do it
We walk the driveway layout for swing or slide clearance under the tree line, set posts to proper footing depth in gravel and concrete with drainage, mount the gate and hardware, then adjust hinges and latches so it swings clean through the full range.
What Gate Installation Costs in Silver Firs
| Item | Typical range in Silver Firs |
|---|---|
| New automatic gate package (gate plus operator) | $3,500 – $8,000 |
| Automation added to an existing gate | $1,200 – $3,500 |
| New driveway gate installation | $2,500 – $6,500 |
Do I need a permit for a gate in Silver Firs?
Often yes. Because Silver Firs is unincorporated Snohomish County, permit and setback questions go to Snohomish County PDS rather than a city office. We can tell you what a typical install involves, but confirm the permit requirement with the county before work is scheduled.
Can you automate a gate that was installed manually?
Yes, and it’s common here. Many Silver Firs gates were built without an operator and get automated later. We check the gate’s weight, swing or slide condition, and post stability first, then size the operator to match so you’re not buying power for a gate that needs hinge work.
Brands We Service in Silver Firs
We work on the brand you already own, from Ghost Controls and Viking residential operators to Linear and DoorKing entry systems. Brand familiarity means we recognize model-level failure patterns instead of guessing, which shortens diagnosis. Parts are ordered per job, so turnaround depends on the brand and model. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Silver Firs, WA
| Service | Typical range in Silver Firs |
|---|---|
| Gate repair (hardware, hinge, latch, alignment) | $150 – $450 |
| Gate post re-set or sleeve | $250 – $700 |
| Electric gate repair (motor or control board) | $200 – $600 |
| Access control or sensor diagnosis and repair | $150 – $500 |
| Operator replacement (residential) | $800 – $2,200 |
| Operator replacement (light commercial) | $1,500 – $4,000 |
| New driveway gate installation | $2,500 – $6,500 |
| Automation added to an existing gate | $1,200 – $3,500 |
| New automatic gate package (gate plus operator) | $3,500 – $8,000 |
| Slide gate installation | $3,000 – $7,500 |
In Silver Firs, price climbs with gate width and weight, whether posts need re-setting in the local glacial soil, and whether power has to be run to a new location. Every price is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Silver Firs
We handle gate work throughout the Silver Firs subdivisions off the Highway 9 and 132nd St SE corridor, including the wooded cul-de-sacs where canopy and drainage shape most jobs. Because the area is compact, dispatch into Silver Firs is straightforward. Call (844) 834-1197. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
- Silver Firs hillside subdivisions off 132nd St SE
- Wooded cul-de-sac lots along the Highway 9 corridor
- Driveway and backyard gate properties under fir and cedar canopy
Service Area – Cities Near Silver Firs
Silver Firs borders several communities we also cover, so a gate job rarely stops at the county line. We work in Mill Creek, WA just to the west, in Mill Creek East, WA next door, and south toward Lake Stickney, WA and Martha Lake, WA. If your property sits near any of these, the same wooded, wet-soil conditions usually apply to your gate.
Serving Silver Firs, WA – Our Local Coverage Area
We serve Silver Firs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Silver Firs
For repair calls, we aim for same-day service when scheduling allows. Call (844) 834-1197. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and new installs are measured and scheduled rather than same-day.
Some subdivisions do, particularly around fence height, gate style, and visibility from the street. Check with your HOA board before ordering materials. Separately, because Silver Firs is unincorporated, confirm any permit or setback requirement with Snohomish County PDS.
Yes. We cover the full Silver Firs community off the Highway 9 and 132nd St SE corridor, including the wooded hillside subdivisions, plus the neighboring cities listed above. If you’re unsure whether your address is inside the service area, call and we’ll confirm.
Whether your gate needs a repair, an electrical diagnosis, or a fresh installation built for the shade and soil here, we’d rather look at it once and give you a straight answer than guess over the phone. Call (844) 834-1197 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Silver Firs Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Whitney Sutton"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Luis Salazar"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Paige Brooks