Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Everett
If your gate is dragging, catching its latch, or refusing to open on command, you’re in the right place. Gate Repair Everett works on the gate systems people actually own here, from Ghost Controls residential openers to DoorKing commercial operators, and we know why gates in this city fail the way they do. Everett’s sloped lots and wet winters leave their mark on gate hardware, and a straight hinge fix rarely solves a problem that started in the ground. Call (844) 834-1197 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Everett Homeowners Call Gate Repair Everett for Gate Repair
Gates are all we do. Not fencing, not garage doors, not general handyman work. That focus means when an automatic gate stops responding in Everett, we’ve usually seen the failure pattern before on the same brand or the same kind of lot.
Our technicians have up to experience, and they work across nine major gate brands, so diagnosis starts with the model in front of them rather than guesswork. We serve residential properties and light-commercial entrances alike, which matters in a city where a waterfront industrial gate and a craftsman-lot pedestrian gate can fail for completely different reasons. Electric gate repair is a core specialty here, not an upsell. We trace electrical, mechanical, and control-board faults and tell you honestly whether a repair makes sense or a replacement does.
Everett homeowners call us because we check the ground before blaming the hinge, we quote the price in writing before any work starts, and we can often get a crew out the same day for a gate that’s stuck open or won’t secure. Call (844) 834-1197 and we’ll talk through what your gate is doing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in Everett
Wood Gate Repair in Everett starts with moisture, because roughly 160 rainy days a year work on timber constantly. Older craftsman and worker-cottage lots around Bayside often have wooden pedestrian gates that swelled at the hinges over the wet season and now bind instead of swinging free. The job usually means easing or replacing swollen hinges, rehanging a sagging stile, treating or splicing rot at the bottom rail, and resetting the latch so it catches clean. A typical wood gate repair in Everett runs $180 to $450, with a written estimate setting the final price before we touch anything.
Swollen Hinges and Binding Frames
When a wooden gate sticks, the hinge is often the symptom rather than the cause. Constant damp swells the timber, and a hinge that was set true in summer sits proud by winter. We check the post and frame first, then correct the hinge line so the gate clears through the whole swing.
Rot at the Bottom Rail
Ground contact is where wooden gates give out first in this climate. Soft timber at the bottom rail lets the whole panel drop and drag. We cut out the rot, splice in sound stock, and get the gate back on its line.
Driveway Gate Repair in Everett
Driveway Gate Repair in Everett frequently comes down to the ground, not the gate. Hillside lots in Bayside and Riverside sit on slumping soils and original concrete footings that crack and settle after the rainy season, so a panel that looks like a sag correction problem is often a footing problem. A typical driveway gate repair in Everett runs $250 to $900 depending on whether we’re adjusting hardware, resetting a hinge post, or re-pouring a footing. That range is an estimate; the written quote you get before work starts is the price you pay.
When the Ground Is the Real Problem
On an older Everett hillside lot, a custom wrought-iron or fabricated swing gate often starts dragging and catching its latch once the wet season passes. The usual fix is to reset or re-pour the footing, re-plumb the hinge post, then correct the sag and re-tension the hardware so the panel swings true. Checking the concrete first saves a return visit.
Corroded Metal and Retrofit Work
Many mid-century homes and waterfront industrial properties still run their original gates and openers. That means rewelding corroded metal and retrofitting an operator to the existing panel rather than hunting for stock parts that don’t exist anymore.
Trusted Brands We Service in Everett
We work on the brand you already own. That covers Linear and Viking for residential swing and slide systems, Ghost Controls for DIY-friendly driveway openers common on newer Everett hillside builds, and DoorKing for the access-controlled entrances on light-commercial properties. Being familiar with each brand’s failure patterns shortens diagnosis and cuts down on return visits. We don’t carry parts stock, so we identify the fault, source what’s needed, and get you back to secure as quickly as the job allows. From a residential slide gate to a commercial barrier arm, the approach is the same: find the actual fault, quote it in writing, fix it once.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Everett Homes
- Shifting posts from seasonal groundwater. Slumping soils on sloped lots push hinge posts out of plumb, so swing gates drag and latches misalign. The fix usually starts at the footing, not the hinge.
- Cracked original concrete footings. Older Bayside and Riverside gates were often set on retaining walls, and the wet season cracks and settles that original concrete. A gate that suddenly won’t latch is often sitting on a footing that moved.
- Wood rot and swollen hinges. Roughly 160 rainy days a year leave wooden pedestrian gates on craftsman lots binding instead of swinging. Bottom rails and hinge lines take the worst of it.
- Corroded metal and aging openers. Mid-century and waterfront industrial properties often still run original gates and operators. These need custom reweld and retrofit work, not off-the-shelf replacements.
Pricing for Gate Repair in Everett, WA
Gate repair pricing in Everett runs on the scope of the job, and the ranges below reflect typical local work. Wood gate repair usually falls between $180 and $450. Driveway gate repair, including hinge and post work, lands around $250 to $900. Electric gate repair, covering motor, circuit board, sensor, and access-control diagnostics, typically runs $200 to $750. Hinge and post repair, realignment, lock repair, and weld or rust work are quoted individually against those ranges. The free estimate is the number that counts: we walk the gate, identify the actual fault, and put the price in writing before any work starts. No invoice should ever come in above the quote. Call (844) 834-1197 for an exact figure.
We Also Serve Cities Near Everett
We take gate repair calls beyond Everett as well, including Eastmont, Mukilteo, Mill Creek, and Silver Firs. If you’re just outside the city line, the same approach applies: diagnose the fault, quote it in writing, fix it right. Read more about our gate repair team or explore the full Everett service area.
Serving Everett, WA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Everett
On a sloped Everett lot, it’s often the ground. Seasonal groundwater moves the hinge post and cracks original concrete footings, so a dragging gate that looks like a hinge problem is frequently a footing problem. A trained technician checks the post base and concrete before replacing hinge hardware. Call (844) 834-1197 for a free estimate, and we’ll look at the ground first.
Because of the wet maritime climate and roughly 160 rainy days a year. Timber swells at the hinges and bottom rail, so gates that swung freely in summer bind by winter. Easing hinges, rehanging a sagging stile, and treating rot usually gets them swinging again. Call (844) 834-1197 for a written quote.
Usually yes. Many of Everett’s original gates on mid-century and waterfront industrial properties are sound metal that just needs rewelding and a retrofitted operator. We match a new operator to the existing panel rather than pushing a full replacement. Call (844) 834-1197 and we’ll tell you which makes sense.
Yes, and it’s a safety matter worth taking seriously. Automatic gates should have functioning sensors and safety edges, and a heavy swing panel can cause serious injury if a sensor fails. If your operator is running without working entrapment protection, have it checked by a trained professional. Call (844) 834-1197 to book an on-site check.
Precision in three places: a correctly set footing, a plumb and braced hinge post, and an operator matched to the panel’s weight and swing. On hillside Everett lots, the footing does most of the work, since groundwater movement is what throws a heavy custom gate out of line. Get the ground right and a well-built gate runs quiet for years. Call (844) 834-1197 for a free estimate on your gate.
If your gate is stuck, dragging, or simply not responding, we’re ready to help. Call (844) 834-1197 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the price is quoted and agreed before any work starts.
Written by the team at Gate Repair Everett.