Gate Motor & Opener Cost in Everett - Honest Price Ranges, Free Written Quote

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 834-1197

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Motor & Opener Cost in Everett?

Replacing a residential gate motor and opener in Everett typically costs $850 to $2,400 for the operator itself, and a full replacement including installation usually lands between $1,600 and $4,200 depending on the gate type, the brand, and whether access control hardware is involved. A repair to an existing operator is far cheaper: most electric gate motor repairs in Everett run $180 to $650 in parts and labor. Light-commercial slide and swing operators sit higher, at $2,800 to $7,500 installed for the operator and controls. These are typical 2026 Everett-market estimates; your written estimate sets the final price.

If your electric gate is acting up, the number that matters first is the repair number, not the replacement number. Plenty of stalled gates need a control board, a limit switch, a battery or a sensor replaced, not a whole new motor. We work on the brand you already own, so the diagnosis starts from what’s actually on your gate.

Key Takeaways

  • Residential operator replacement: roughly $850 to $2,400 for the unit, $1,600 to $4,200 installed.
  • Electric gate motor and control-board repair: roughly $180 to $650 depending on the part.
  • Light-commercial operators (slide, swing, barrier arm): roughly $2,800 to $7,500 installed.
  • Brand and gate type drive price more than anything else. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule all price differently.
  • We diagnose electrical, mechanical and control-board failures before recommending replacement. Free estimates, and fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Motor & Opener Cost Breakdown (2026)

Here’s how the Everett numbers break down by line item. Every figure is a typical estimate for this market, and the written estimate you get on site is what actually sets your price.

Item Typical Everett Range (2026)
Residential swing gate operator (Mighty Mule, Ghost Controls, Elite, Viking) $850 – $1,600 installed
Residential slide gate operator (Linear, LiftMaster, Elite) $1,400 – $2,800 installed
Mid-grade swing or slide operator (LiftMaster, Linear) $1,800 – $3,200 installed
High-end commercial operator (FAAC, BFT, DoorKing) $3,400 – $7,500 installed
Barrier arm operator, light-commercial $2,800 – $6,000 installed
Control board replacement $280 – $650
Motor replacement (operator body, controls retained) $400 – $1,100
Limit switch or sensor repair $150 – $380
Battery and backup power repair $180 – $450
Access-control keypad or remote receiver (basic) $220 – $600
Safety photo-eye or loop sensor replacement $200 – $550
New wiring run to gate location $350 – $1,200

What drives the price up: the operator brand and grade, the gate weight and travel length, whether power already reaches the gate, and how much access-control hardware is layered on top. A single-panel residential swing gate on an existing circuit is the low end. A commercial slide gate with a DoorKing access controller, loops and safety edges is the top of the range.

What drives it down: a gate that already has a working wiring run and a sound frame. If the operator failed but the gate, posts and hinges are fine, you’re buying an operator, not a gate. That distinction alone saves thousands, and it’s the first thing to confirm before you spend anything.

What Affects Gate Motor & Opener Pricing in Everett

  • Gate type and weight. A vinyl or aluminum swing gate for a driveway takes a smaller operator than a long steel slide gate. The heavier the leaf, the larger the motor, and the larger the motor, the higher the unit cost.
  • Brand and grade. Consumer-grade units like Mighty Mule and Ghost Controls sit at the low end. FAAC, BFT and DoorKing commercial operators sit at the high end. The same repair costs different amounts across those tiers because parts price differently.
  • Whether power is already at the gate. Wiring a new circuit out to a gate post is real work: trenching, conduit and a disconnect. If the circuit exists, that line item disappears.
  • Access control complexity. A single remote is cheap. Keypads, intercoms, telephone entry and loop detectors each add hardware and setup time, and property managers running HOA entrances usually need all of them.
  • Everett’s wet season and soil. Our long rainy stretch works on gate hardware. Moisture gets into operator housings, corrodes connections and stresses photo-eye sensors, which is why sensor and control-board repairs are common here. The soil in older Everett neighborhoods also settles around gate posts over time, so a gate that’s dragging isn’t always an operator problem. Sometimes it’s a post or hinge issue that makes a healthy motor work harder.
  • Repair versus replacement. A control board or limit switch fix costs a fraction of a new operator. A motor that’s seized, or an operator discontinued years ago, is a replacement conversation.

If you’re still working out whether the gate itself needs attention or just the operator, our gate repair in Everett page covers the full range of what we diagnose and fix.

How to Save on Gate Motor & Opener

A few practical moves keep the number down without compromising the gate.

  • Get the diagnosis before the quote. Ask exactly which component failed: motor, board, sensor, limit switch, battery or wiring. A written diagnosis at a free estimate means you can compare apples to apples instead of guessing.
  • Repair the operator if the body and controls are sound. A control board at $280 to $650 beats an operator at ten times that. Repair or replace, we’ll tell you which one actually makes sense.
  • Keep the brand you already have if parts are available. Switching brands usually means new mounting hardware, new wiring terminations and a new remote receiver. Staying with LiftMaster, Linear, FAAC or whichever operator is on your gate is often the cheaper path.
  • Fix the gate frame before it kills the motor. A sagging gate forces the operator to fight gravity every cycle. Straightening a hinge or resetting a post is cheap compared to replacing a motor that burned out from the load.
  • Ask about simple access control first. If your current remote setup works, upgrading to a full keypad and intercom system isn’t required. Add what you need, not what looks impressive on a spec sheet.

Free estimates make the comparison easy. Call (844) 834-1197, and we’ll look at what you have and give you a written number for repair and for replacement so you can see both.

Repair or Replace? What We See on Everett Gates

Most Everett gate calls fall into a few patterns. An operator that hums but doesn’t move usually has a capacitor, limit switch or board problem. An operator that’s dead to the remote is often a battery, receiver, or a tripped safety sensor. A gate that stops halfway through travel tends to be a limit switch or a sensor alignment issue. All three are repair-grade failures in most cases, and all three are cheaper than a new operator.

Replacement makes more sense when the operator is old and parts are no longer made, when the housing is water-damaged past the point of sealing, or when the gate itself has outgrown the motor. Those are the cases where a new unit pays for itself. We’ll tell you which one applies to your gate, plainly, without steering you toward the bigger invoice.

What Happens When You Call

We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. On site we check power, the operator, the controls, the sensors and the gate’s physical alignment, then hand you a written estimate covering repair and replacement. Our technicians have up to experience, and we’ll get you back to secure in one visit wherever the parts allow.

For a sense of the neighborhoods we cover around the city, see our Everett page. If you’re nearby and comparing local service options, our gate service in Everett page explains how a typical visit runs from first call to final check.

FAQs – Gate Motor & Opener Cost

How much does a gate motor cost in Everett?

A replacement residential gate motor in Everett typically runs $850 to $2,400 for the operator, installed, with most single-panel swing gates landing around $1,600 to $3,200 once installation and controls are included. Light-commercial operators climb to $2,800 to $7,500 installed. Call (844) 834-1197 for an exact quote, estimates are free.

Is it cheaper to repair or replace a gate opener?

Repair is cheaper in most cases: control board, sensor and limit-switch fixes run about $150 to $650, well under a new operator. Replacement only makes financial sense when the motor is seized, the housing is badly water-damaged or the operator is discontinued. Call (844) 834-1197 and we’ll tell you which one actually makes sense for your gate.

Can you come today?

Same-day service is often possible. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 834-1197 for the next available opening, and the estimate is free.

Why does my electric gate stop halfway?

A gate that stops mid-travel is usually a limit switch, a misaligned photo-eye or a sensor obstruction, and those repairs typically cost $150 to $550 in Everett. It’s rarely a failed motor. Call (844) 834-1197 and we’ll diagnose it on site, with a free estimate before any work begins.

Do you work on the brand of opener I already have?

Yes. We work on the brand you already own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. Brand familiarity shortens diagnosis because we recognize common failure patterns model by model. Call (844) 834-1197 and tell us what’s on your gate.

Electric gate acting up? Call (844) 834-1197 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll give you a written number for repair and replacement before anything is ordered.

Pricing reflects the Everett market as of 2026. Gate Repair Everett offers free estimates, call (844) 834-1197.

Written by the team at Gate Repair Everett.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Whitney Sutton

"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."

- Luis Salazar

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Brooks
Need Gate Repair help in Everett? Licensed & insured · 1-hour response · free estimates
Call (844) 834-1197

Request a Free Estimate

Tell us what's going on in Everett. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7