Gate Parts & Welding Cost in Everett - Honest Price Ranges, Free Written Quote

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 834-1197

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Parts & Welding Cost in Everett?

Gate parts and welding work in Everett typically runs $180 to $650 for most residential repairs, with common jobs like hinge and latch replacement landing near the low end and fabricated or rewelded gate frames climbing toward the upper end. Larger commercial swing and slide gate repairs, including operator mounting plates and barrier arm hardware, often fall in the $450 to $1,400 range. The written estimate you receive after we look at the gate sets the final price.

We’re Gate Repair Everett, and we handle the parts, hardware, and welding that keep swing gates, slide gates, and barrier arms working. Our technicians have up to experience across the operator brands most Everett properties run, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Estimates are free, and we can usually tell you on that first look whether the gate needs a part, a weld, or a full replacement.

Gate Parts & Welding Cost Breakdown (2026)

The table below shows the typical ranges we see for parts and welding on Everett gates. These are estimates for the work itself, and the written estimate after we inspect the gate is what you pay.

Work or part Typical cost range
Hinge or latch replacement (per hinge) $180 – $320
Weld repair on a steel gate frame or post $220 – $480
Gate roller or track roller replacement (slide gates) $180 – $350
Operator mounting plate fabrication and welding $350 – $650
Swing gate arm or actuator bracket repair $280 – $550
Barrier arm replacement or repair (commercial) $450 – $1,000
Slide gate track section replacement or rewelding $400 – $900
Full commercial gate frame fabrication and weld-out $900 – $1,400

What pushes a job toward the top of these ranges? Heavy or double gates need more fabrication and more time to brace and line up. A gate that’s been out of alignment for months often wears the hinges, rollers, and frame together, so the repair touches several parts at once. Commercial barrier arms and slide gates built for HOA or parking-lot traffic carry heavier hardware, and that hardware costs more. On the low end, a single hinge, latch, or broken bracket on a residential swing gate is usually a short visit with a straightforward part.

What Affects Gate Parts & Welding Pricing in Everett

Everett’s wet winters work on gate hardware year after year. That shapes pricing in ways that are specific to this part of Snohomish County.

  • Rain and standing water at the base. Everett gets long stretches of drizzle, and water that pools around a gate post speeds up rust at the footing and along the bottom rail. When rust has eaten into the frame, the weld repair grows to include cutting out the damaged steel, which moves the job up the range.
  • Gate weight and material. A light aluminum residential gate is quicker to weld and cheaper to fit with hardware than a steel commercial gate or a solid wood gate on a steel frame. Heavier gates also need more bracing during the weld so nothing shifts while it cools.
  • Operator brand and model. Hardware and brackets differ across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we know the model going in, we source the right part faster and avoid a return visit. That’s one reason we ask for the brand and model when you call.
  • How long the gate has been failing. A gate that’s been dragging or sagging for a while wears several parts at once: hinges, rollers, and the operator arm. Catching it early keeps the repair to one or two parts.
  • Access to the weld area. A gate tucked behind landscaping or tight against a fence line takes longer to reach and brace, and that time is part of the estimate.
  • Residential versus commercial. HOA entrances and parking-lot gates use heavier operators, larger control boxes, and barrier arms rated for constant use. The hardware costs more, and the job often involves more than one part at a time.

How to Save on Gate Parts & Welding

Most of what drives a gate parts bill is time and how much has worn out by the time someone looks at it. A few habits keep the number down.

  • Fix the small part before it takes the big part with it. A worn hinge that lets the gate sag will start loading the operator arm. Replacing the hinge early is cheaper than replacing the hinge and the arm.
  • Ask for the brand and model when you call. If you can read the label on the operator, tell us. Knowing the brand from the start helps us bring the right part and cuts the chance of a second visit.
  • Clear the gate’s swing and track. Debris, gravel, and fallen branches at the gate’s path make it work harder and wear the hardware. A quick sweep now and then helps.
  • Watch for rust at the base after a wet season. Everett’s rain is hard on the bottom rail and post footing. If you see bubbling paint or orange streaks, mention it when you call so we can plan for it.
  • Get a free estimate before the gate stops moving. A repair identified early is almost always less than a repair plus a replacement part. Call (844) 834-1197 and we’ll come look at no charge.

Repair or Replace: How Gate Parts Pricing Compares in Everett

For most residential gates in Everett, repair is the cheaper path and the right one. A hinge, latch, roller, or bracket replacement in the $180 – $350 range fixes a gate that’s otherwise sound. When the frame itself is failing, weld repair in the $220 – $480 range usually restores it. Replacement starts to make sense when the frame has rusted through in several places, when the gate has been hit and is out of square, or when the hardware and operator are both at the end of their life and the cost of repairs approaches the cost of a new gate.

We’ll tell you which one actually makes sense. If a repair will hold, we’ll say so. If the gate is too far gone, we’ll explain why, and the written estimate will show the repair price next to the replacement price so you can compare.

What’s Included in a Gate Parts and Welding Quote

The estimate we write covers the parts, the labor, and the welding in one price, so there’s no surprise line item later. We list the specific parts by name and brand, note any fabrication or weld work, and give you a range for what happens if more turns up once the gate is opened up. If a repair uncovers a worn part we couldn’t see from the outside, we call before doing the extra work.

Welding on a gate is hot work, and it’s dangerous if someone tries it without the right equipment or without knowing what’s behind the metal. There’s no DIY path we’d recommend here. Please leave the welding and any work near the gate’s electrical wiring to a trained technician. If the operator or its power supply is part of the problem, that’s electrical work, and it deserves the same care.

Gate Parts for Every Operator Brand

We work on the brand you already own. That covers LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, across residential swing and slide gates and light-commercial systems. Knowing the failure patterns for each brand and model means we diagnose faster and bring the right hardware the first time. For the full range of what we fix, see gate repair Everett. If you’re weighing a new install instead of a repair, Everett is where our local service information lives.

Why Everett Gate Owners Call Us

We focus only on gates, not fencing, garage doors, or general electrical work. That focus means our technicians see the same parts wear out the same ways and know how to source the right replacements. Electric gate repair is a core specialty, so a control board, sensor, or motor problem goes to someone whose job it is, not a general contractor who dabbles in gates.

The scope is broad: swing, slide, and barrier arm configurations, residential and light commercial, low-end Mighty Mule units and high-end FAAC and BFT commercial operators. Our technicians have up to experience. We’re licensed and insured, we work hard to get you back to secure in one visit, and we’re honest about repair versus replacement.

FAQs – Gate Parts & Welding Cost

How much does gate parts and welding cost in Everett?

Most residential gate parts and welding jobs in Everett run $180 to $650, and commercial swing, slide, and barrier arm repairs typically run $450 to $1,400. The written estimate after we inspect the gate sets the final price. Call (844) 834-1197 for a free estimate.

Can you fix my gate the same day?

Same-day service is often possible for common parts like hinges, latches, and brackets when the right part is on hand. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 834-1197 and we’ll confirm timing.

Is it cheaper to repair or replace my gate in Everett?

Repair is cheaper for most Everett gates. A hinge or roller replacement runs $180 – $350 and a weld repair runs $220 – $480, both well below the cost of a new gate. Replacement makes sense when the frame has rusted through in several places or the gate is bent out of square. Call (844) 834-1197 for a free estimate comparing both.

Do you work on my gate operator brand?

Yes, we work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Brand familiarity helps us source the right part and diagnose faster. Call (844) 834-1197 with the brand and model if you have it.

What does a gate weld repair cost in Everett?

Weld repair on a steel gate frame or post typically runs $220 to $480, and operator mounting plate fabrication runs $350 to $650. Heavy commercial frames reach $900 to $1,400. Call (844) 834-1197 for a free estimate.

Pricing reflects the Everett market as of 2026. Gate Repair Everett offers free estimates – call (844) 834-1197.

Written by the team at Gate Repair Everett.

What Our Customers Say

★★★★★ 4.8 from 8+ reviews

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Whitney Sutton

"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."

- Luis Salazar

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paige Brooks
Need Gate Repair help in Everett? Licensed & insured · 1-hour response · free estimates
Call (844) 834-1197

Request a Free Estimate

Tell us what's going on in Everett. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7